Maintenance of diamond saw blades and use requirements are those? It includes the following:

1. Diamond saw blades If not used immediately, it should be flat or exploit the hole to hang up, or other items can not be stacked on flat foot diamond saw blades, and should pay attention to moisture, anti-corrosion.

2. When the diamond saw blade is no longer sharp, cutting surface roughness, it must promptly re-grinding. Grinding can not change the original angle, and destruction balancing.

3. inner diameter diamond saw correction, the positioning hole machining, etc., must be performed by the manufacturer. If the process is bad, it will affect the product effect, and may be dangerous, reaming principle it can exceed the original aperture 20mm, so as not to affect the balance of stress.

Diamond saw blade requirements:

1. When working, the workpiece should be fixed to ensure that, in line with the profile positioning eat knife direction, so as to avoid abnormal cut, do not apply lateral pressure or curve cutting, smooth feed to avoid the impact of the blade contacts the workpiece, causing the blade breakage, or piece flying, accidents.

2. Work when found abnormal sound and vibration, cutting surface roughness, or odor, you must terminate the job immediately, timely inspection, troubleshooting to avoid accidents.

3. diamond cutting blade at the beginning and stop cutting, do not feed too fast, to avoid broken teeth and damaged.

4. If cutting aluminum or other metal, use a dedicated coolant to avoid overheating the blade, resulting in tooth paste, and other damage, affecting the cutting quality.

5. Equipment flute and aspiration means to ensure the smooth flow of the slag to prevent the accumulation of slag into blocks, affecting production and safety.

6. When dry cutting, please do not long continuous cut, so as not to affect the service life and the effect of cutting diamond saw blades; wet sheet cutting, cutting water should be added, to guard against leakage.